This unique gate is 9 feet wide by 11 feet high with the right side swinging open and the left fixed.  A complicated construction as it’s covered in Ipe hardwood one of the heaviest woods around.  It still swings open very easily despite the weight.  A flush mounted commercial door lock keeps it closed.  Design by MW Design Group llc.

This stately custom fence was only about 10 years old, but started suffering from some severe wood rot.  Many pieces of the fence had been constructed from cellular PVC which doesn’t rot, but the parts that weren’t became dry rotted and filled with bugs of all sorts.  After careful disassembly, the affected parts including the flat panels were replaced with Azek trim.  With all nails and screws made from stainless steel, this fence should last a long time.  It’s currently getting its new paint job.

This fencing in a downtown garden used horizontal decking boards to give a unique look to a necessary lot division.  Gates were equipped with commercial locks and all fasteners were stainless steel.  This custom fence is not only sturdy but if maintained should last a long time.  Design by MW Design Group llc.

This is a very unique look for a custom fence.  It is constructed with ipe hardwood and stainless steel.  Design by MW Design Group llc.

A nice new porch deck with lattice sides replaced one that was in bad repair.

This bench is simple and sturdy, built from cedar with a mahogany top.

Dimensions: 38 in. deep by 32 in. wide by 36 in. high.  Materials: Honduras Mahogany and Stainless Steel Fasteners, Marine Spar Varnish.  These chairs can be made from any wood.  Conveniently, they fold down flat for storage.